642-359 ICSNS Real Exam Questions

Implementing Cisco Storage Networking Solutions

Candidates can prepare for this exam by taking the Implementing Cisco Storage Networking Solutions (ICSNS) v4.0 and Implementing Advanced Cisco Storage Networking Solutions (IASNS) v4.0 courses. This exam tests a candidate’s ability to install, configure, and troubleshoot Cisco storage products in order to maintain a highly scalable, efficient, high-performing storage networking environment. Cisco Data Center Storage Networking Support Specialist professionals understand how to deploy and optimize the features and benefits of the following products to provide fast and accurate resolution of network installation and customer service issues:

1: As which two options can an RMON event manifest itself? (Choose two.)
A.log entry
B.email message
C.SNMP trap
D.script action
E.alarm
Correct Answers: A C

2: You have connected the Cisco MDS 9222i Switch to the existing Brocade SAN fabric which consists of five 32-port Brocade switches. You have selected interoperability mode 3, created VSAN 10 that operates in that interoperability mode, and configured the fc1/1 interface that is connected to the Brocade as an E_port. The connectivity is still broken. Which option should you apply to fix the connectivity?
A.Change the interoperability mode to 0.
B.Restart the Brocade switch for the interoperability mode to work.
C.Set BB_credits on the MDS 9222i fc1/1 interface to 16.
D.Deploy static DomainID using values from 1 to 31.
Correct Answers: C

3: With regards to FCIP encapsulation, which statement is true?
A.The Fibre Channel frame is encapsulated into an IP packet.
B.The Fibre Channel frame is encapsulated into an MPLS packet.
C.The Fibre Channel frame is encapsulated into an Ethernet frame.
D.The Fibre Channel frame is encapsulated into an iSCSI packet.
Correct Answers: A

4: Which two Cisco MDS 9000 Series Switches are used in small- and medium-sized SAN topologies? (Choose two.)
A.Cisco MDS 9124
B.Cisco MDS 9222i
C.Cisco MDS 9506
D.Cisco MDS 9509
E.Cisco MDS 9513
Correct Answers: A B

5: Refer to the exhibit. When looking at the Cisco Fabric Manager, you notice that one of the switches has this symbol superimposed on it. What is the reason?
A.The device is manageable but there are operational problems.
B.The device is online but not working properly.
C.The device is not manageable.
D.The device is down.
Correct Answers: D

6: What are four valid protocols for copying software to the MDS 9000 family switches? (Choose four.)
A.Remote Copy Service
B.Secure Copy Protocol
C.Trivial File Transfer Protocol
D.File Transfer Protocol
E.Secure Trivial File Transfer Protocol
F.Secure File Transfer Protocol
Correct Answers: B C D F

7: Choose the correct list of tasks to configure Remote Spanning.
A.Create a VSAN interface.
Enable a Fibre Channel tunnel.
Initiate the Fibre Channel tunnel.
Configure the ST_Port in the source switch.
Configure the SD_Port in the destination switch.
Configure a SPAN session in the source switch.
B.Create a VSAN interface.
Enable a Fibre Channel tunnel.
Initiate the Fibre Channel tunnel.
Configure the ST_Port in the source switch.
Configure the SD_Port in the destination switch.
Configure an RSPAN session in the source switch.
C.Create an RSPAN interface.
Enable a Fibre Channel tunnel.
Initiate the Fibre Channel tunnel.
Configure the SD_Port in the destination switch.
Configure the ST_Port in the source switch.
Configure an RSPAN session in the source switch.
D.Create a VSAN interface.
Enable a Fibre Channel tunnel.
Initiate the Fibre Channel tunnel.
Configure the ST_Port in the destination switch.
Configure the SD_Port in the source switch.
Configure an RSPAN session in the source switch.
Correct Answers: B

8: When large Fibre Channel frames must be sent from an MSM 18/4 module at the central site to the remote offices, what is the consequence of disabling the Path MTU Discovery and using the default Ethernet MTU?
A.Packet shaping becomes effective.
B.Minimum retransmission interval is prolonged.
C.Jumbo frames are enabled.
D.Large Fibre Channel frames are fragmented.
Correct Answers: D

9: Refer to the exhibit. The customer’s ISL links are flapping and seem to go down every few days. While troubleshooting the problem, they determine that the speed of failover to the redundant path is taking too long. What is the recommended solution to the problem, involving turning on a feature?
A.use port tracking
B.disable the flapping ISL
C.use port channel
D.adjust FSPF link costs
Correct Answers: A

10: A host is unable to access the storage network after its HBA is replaced. Which of these switch configurations could be preventing access?
A.port-based zoning
B.port-mode security
C.port security
D.port VSAN membership
Correct Answers: C

Download  |  Password: certificatexam.com