642-067 ARSFE(Advanced Routing and Switching for Field Engineers) Real Exam Questions

The 642-067 ARSFE Advanced Routing and Switching for Field Engineers exam is the exam associated with the Cisco Routing and Switching Field Specialist certification. This exam tests a candidate’s knowledge of configuring and implementing the advanced capabilities of Cisco routing and switching solutions, verifying and troubleshooting the advanced capabilities of Cisco routing and switching solutions. Candidates can prepare for this exam by taking the ARSFE Advanced Routing and Switching for Field Engineers course.

1: What is a characteristic of the Cisco Validated Design architectural selling approach?
A.This approach separates technologies based on customer buying patterns.
B.This approach integrates solutions by combining technologies that are aligned to customer buying patterns.
C.Although this approach supports verticalization, it is not aligned to partner programs.
D.Although this approach is aligned to partner programs, it does not support verticalization.
Correct Answers: B

2: When HSRP is configured on a network, which two of these items are provided, which are shared between the routers that run HSRP? (Choose two.)
A.TCP-based hello packets
B.the impact of flapping links if timers are too low
C.a shared single interface
D.the ability to track serial interfaces
E.UDP-based hello packets
Correct Answers: B D

3: Which term represents the mode that is used when the router stores log messages in RAM memory?
A.syslog logging
B.terminal logging
C.buffered logging
D.console logging
Correct Answers: C

4: How are RIP routing contexts implemented in MPLS VPN?
A.RIP does not support routing contexts
B.routing contexts are implemented in a single routing process
C.routing contexts are implemented using multiple routing processes
D.routing contexts are implemented as several instances of a single routing process
E.routing contexts are implemented as a single instance of several routing processes
Correct Answers: D

5: What is a primary objective of the security architecture assessment?
A.document power and UPS availability
B.to integrate routing and switching components
C.create a design specification document
D.document the customer’s current and future technology projects
Correct Answers: B

6: Which architecture provides a core infrastructure that allows customers to capitalize rapidly on changing business requirements?
A.data center
B.campus
C.branch
D.teleworker
Correct Answers: B

7: Which PIN architecture works with DMVPN, GETVPN, and Ethernet?
A.data center
B.teleworker
C.branch
D.campus
Correct Answers: C

8: When implementing MPLS VPNs between CE and PE routers, which of these statements is correct?
A.If using IS-IS as the PE-CE routing protocol, no redistribution is required.
B.If using static routes between the CE and PE routers, no redistribution of other VPN routes is required.
C.If the PE-CE protocol is not BGP, redistribution of other VPN routes from MP-BGP is required.
D.If RIP is the routing protocol that is used between the PE-CE routers, no redistribution is required, but any other protocol will require redistribution.
E.If using OSPF or EIGRP as the PE-CE routing protocol, redistribution is not required, but any other protocol or static route will require redistribution.
Correct Answers: C

9: In which phase is a systems acceptance test plan developed and documented?
A.Implement
B.Design
C.Prepare
D.Operate
Correct Answers: B

10: What will happen if you issue the redundancy force-switchover command on a Catalyst 6500 Series Switch with redundant supervisor modules?
A.reset of the primary supervisor
B.manual switchover from standby to active supervisor
C.manual switchover from active to standby supervisor
D.automatic switchover from active to standby on primary supervisor failure
Correct Answers: C

Download  |  Password: certificatexam.com