CCNP Voice (CCVP) 642-446 CIPT1 v6.0 Real Exam Questions

Implementing Cisco Unified Communications IP Telephony, Part 1

Last day to test:  February 28, 2011

The 642-446 CIPT1 Implementing Cisco Unified Communications Manager Part 1 is the exam associated with the CCNP Voice certification. This exam tests a candidate’s knowledge of deploying a Cisco Unified Communications Manager to support single site and centralized call processing models. Candidates can prepare for this exam by taking the CIPT1 Implementing Cisco Unified Communications Manager Part 1 course.

1: If a service is currently deactivated, how can the service be reactivated from the Cisco Unified Communications Manager Serviceability Control Center page?
A.by clicking on the radio button to the left of the service on the Control Center page
B.by selecting Cisco Unified CM Serviceability > Service Activation and then clicking on the radio button to the left of the service to activate it
C.by selecting Tools > Service Activation, selecting the correct server, and clicking on the radio button to the left of the service to activate it
D.by selecting Cisco Unified CM Serviceability > Tools, clicking on the radio button to the left of the service that needs to be activated, and then returning to the Control Center to activate the service
Correct Answers: C

2: Which two of these media resources are available only in hardware? (Choose two.)
A.transcoding
B.audio conferencing
C.MTP
D.annunciator
E.MOH
F.voice termination
Correct Answers: A F

3: Which three steps are necessary in order to configure DHCP for phone support using the GUI in Cisco Unified Communications Manager 6.0? (Choose three.)
A.add the DHCP server IP address to the device pool
B.activate DHCP Monitor Service
C.add and configure the DHCP server
D.start the application on an external server
E.configure the DHCP subnet
F.download the DHCP server application from the plug-in page
Correct Answers: B C E

4: Which two of these are characteristics of multicast music on hold? (Choose two.)
A.point-to-multipoint, two-way audio stream
B.separate audio stream for each connection
C.multiple audio streams that require multiple multicast IP addresses
D.support for all codecs that are also supported by Cisco Unified Communications Manager servers
E.conservation of system resources and bandwidth
F.the requirement that there always be a dedicated MOH server
Correct Answers: C E

5: Which three determinations are possible when using the Presence feature in a Cisco Unified Communications network? (Choose three.)
A.Determine if an IP phone has been unplugged if the phone is in the same Cisco Unified Communications cluster as the watcher.
B.Determine if an IP phone is on hook or off hook if the phone is outside the Cisco Unified Communications cluster of the watcher.
C.Determine if an IP phone is on hook or off hook if the phone is in the same Cisco Unified Communications cluster as the watcher.
D.Determine if a set of IP phones is on hook or off hook if if the phones are in the same Cisco Unified Communications cluster as the watcher.
E.Determine if an IP phone has been moved or the user has been changed if the phone is in the same Cisco Unified Communications cluster as the watcher.
F.Determine if an IP phone has been off hook beyond a specified period of time if the phone is in the same Cisco Unified Communications cluster as the watcher.
Correct Answers: B C D

6: What is one difference between Cisco inline power and 802.3af PoE?
A.Cisco inline power should only be activated for those ports that require PoE to avoid oversubscription.
B.You must determine the total number of IP phones the switch can support with 802.3af to avoid oversubscription.
C.You must specify which set of pins the powered device is going to accept power on for 802.3af.
D.Cisco inline power provides a variable amount of power by using CDP.
Correct Answers: B

7: Which IP phone hardening technique will prevent call signaling and media stream tampering?
A.disable GARP
B.disable PC-to-voice VLAN access
C.use MIC firmware images signed by Cisco
D.store IP phone configuration files on the SFTP server
E.deploy authentication and encryption between IP phones and Cisco Unified Communications Manager
Correct Answers: E

8: Which best describes the purpose of a Cisco Unity voice-mail profile?
A.to determine whether to use the MWI on number and the MWI off number
B.to determine the number that is dialed when users press the Message button
C.to define voice-mail-related attributes
D.to assign a partition to any email-related number
Correct Answers: C

9: A range of Meet-Me conference numbers is reserved for manager use. Which method can be used to restrict non-managers from accessing these Meet-Me numbers without limiting their ability to initiate ad hoc conferences?
A.Place the Meet-Me numbers in an MRGL that is only assigned to the managers’ phones.
B.Place the Meet-Me numbers in a partition that is only assigned to the CSS for the managers’ phones.
C.Place the conference bridge resource in an MRGL that is only assigned to the managers’ phones.
D.Place the conference bridge resource in a partition that is only assigned to the CSS for the managers’ phones.
Correct Answers: B

10: The Show menu in which navigation window will allow you to determine the model, type of processors, and total memory in a Cisco Unified Communications Manager 6.0 server?
A.Cisco Unified Communications Manager Administration
B.Cisco Unified Communications Manager Serviceability
C.Disaster Recovery System
D.Platform Administration
E.Cisco Unified Operating System Administration
Correct Answers: E

Download  |  Password: certificatexam.com