Official 2014 Latest Microsoft 70-412 Exam Dump Free Download(181-190)!
QUESTION 181
Your network contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2012 R2. Server1 has the Active Directory Certificate Services server role installed and configured. For all users, you are deploying smart cards for logon. You are using an enrollment agent to enroll the smart card certificates for the users. You need to configure the Contoso Smartcard Logon certificate template to support the use of the enrollment agent. Which setting should you modify? To answer, select the appropriate setting in the answer area.
Answer:
QUESTION 182
Hotspot Question
Your network contains an Active Directory domain named contoso.com. The domain contains the two servers.The servers are configured as shown in the following table.
You investigate a report about the potential compromise of a private key for a certificate issued to Server2.
You need to revoke the certificate issued to Server2. The solution must ensure that the revocation can be reverted. Which reason code should you select? To answer, select the appropriate reason code in the answer area.
Answer:
QUESTION 183
Drag and Drop Question
Your network contains two Active Directory forests named contoso.com and adatum.com. All domain controllers run Windows Server 2012 R2. A federated trust exists between adatum.com and contoso.com. The trust provides adatum.com users with access to contoso.com resources.
You need to configure Active Directory Federation Services (AD FS) claim rules for the federated trust. The solution must meet the following requirements:
– In contoso.com, replace an incoming claim type named Group with an outgoing claim type named Role.
– In adatum.com, allow users to receive their tokens for the relying party by using their Active Directory group membership as the claim type.
The AD FS claim rules must use predefined templates.
Which rule types should you configure on each side of the federated trust?
To answer, drag the appropriate rule types to the correct location or locations. Each rule type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 184
Drag and Drop QuestionYour network contains four servers that run Windows Server 2012 R2. Each server has the Failover Clustering feature installed. Each server has three network adapters installed. An iSCSI SAN is available on the network.
You create a failover cluster named Cluster1.
You add the servers to the cluster.
You plan to configure the network settings of each server node as shown in the following table.
You need to configure the network settings for Cluster1.
What should you do?
To answer, drag the appropriate network communication setting to the correct cluster network. Each network communication setting may be used once, more than once, or not at all.
You may need to drag the split bar between panes or scroll to view content.
Select and Place:
Answer:
QUESTION 185
Hotspot Question
You have a server named Server1 that runs Windows Server 2012 R2. The volumes on Server1 are configured as shown in the following table.
A new corporate policy states that backups must use Windows Azure Online Backup whenever possible.
You need to identify which backup methods you must use to back up Server1. The solution must use Windows Azure Online Backup whenever possible. Which backup type should you identify for each volume? To answer, select the appropriate backup type for each volume in the answer area.
Answer:
QUESTION 186
Drag and Drop Question
Your network contains an Active Directory domain named contoso.com. The domain contains four member servers named Server1, Server2, Servers, and Server4. All servers run Windows Server 2012 R2. Server1 and Server2 are located in a site named Site1. Server3 and Server4 are located in a site named Site2. The servers are configured as nodes in a failover cluster named Cluster1. Cluster1 is configured to use the Node Majority quorum configuration. You need to ensure that Server1 is the only server in Site1 that can vote to maintain quorum.
What should you run from Windows PowerShell? To answer, drag the appropriate commands to the correct location. Each command may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
Answer:
QUESTION 187
Your network contains an Active Directory forest named contoso.com. The forest contains a single domain. The domain contains three domain controllers. The domain controllers are configured as shown in the following table.
You plan to test an application on a server named Server1. Server1 is currently located in Site1. After the test, Server1 will be moved to Site2. You need to ensure that Server1 attempts to authenticate to DC3 first, while you test the application. What should you do?
A. Create a new site and associate the site to an existing site link object.
B. Modify the priority of site-specific service location (SRV) DNS records for Site2.
C. Create a new subnet object and associate the subnet object to an existing site.
D. Modify the weight of site-specific service location (SRV) DNS records Site1.
Answer: B
Explanation:
Service Location (SRV) Resource Record
Priority A number between 0 and 65535 that indicates the priority or level of preference given for this record to the host that is specified in Host offering this service.
Priority indicates this host’s priority with respect to the other hosts in this domain that offer the same service and are specified by different service location (SRV) resource records.
Incorrect:
Not D:
Weight: A number between 1 and 65535 to be used as a load-balancing mechanism. When you select among more than one target SRV host for the type of service (specified in Service) that use the same Priority number, you can use this field to weight preference toward specific hosts. Where several hosts share equal priority, SRV-specified hosts with higher weight values that are entered here should be returned first to resolver clients in SRV query results. Reference: Service Location (SRV) Resource Record Dialog Box
QUESTION 188
Your network contains an Active Directory domain named contoso.com. The domain contains a file server named Server1.
The File Server Resource Manager role service is installed on Server1. All servers run Windows Server 2012 R2. A Group Policy object (GPO) named GPO1 is linked to the organizational unit (OU) that contains Server1. The following graphic shows the configured settings in GPO1. Server1 contains a folder named Folder1. Folder1 is shared as Share1.
You attempt to configure access-denied assistance on Server1, but the Enable access-denied assistance option cannot be selected from File Server Resource Manager.
You need to ensure that you can configure access-denied assistance on Server1 manually by using File Server Resource Manager. Which two actions should you perform?
A. Set the Enable access-denied assistance on client for all file types policy setting to Disabled for GPO1.
B. Set the Customize message for Access Denied errors policy setting to Not Configured for GPO1.
C. Set the Enable access-denied assistance on client for all file types policy setting to Enabled for GPO1.
D. Set the Customize message for Access Denied errors policy setting to Enabled for GPO1.
Answer: D
Explanation:
D. ensure that you can configure access-denied assistance
http://technet.microsoft.com/en-us/library/hh831402.aspx#BKMK_1
QUESTION 189
Your company has a main office and a remote office. The remote office is used for disaster recovery.
The network contains an Active Directory domain named contoso.com. The domain contains member servers named Server1, Server2, Server3, and Server4. All servers run Windows Server 2012 R2. Server1 and Server2 are located in the main office. Server3 and Server4 are located in the remote office.
All servers have the Failover Clustering feature installed. The servers are configured as nodes in a failover cluster named Cluster1. Storage is replicated between the main office and the remote site. You need to ensure that Cluster1 is available if two nodes in the same office fail. What are two possible quorum configurations that achieve the goal? (Each correct answer presents a
complete solution. Choose two.)
A. Node Majority
B. No Majority: Disk Only
C. Node and File Share Majority
D. Node and Disk Majority
Answer: AB
Explanation:
Depending on the quorum configuration option that you choose and your specific settings, the cluster will be configured in one of the following quorum modes:
* (A) Node majority (no witness) Only nodes have votes. No quorum witness is configured. The cluster quorum is the majority of voting nodes in the active cluster membership.
* (B) No majority (disk witness only) No nodes have votes. Only a disk witness has a vote. The cluster quorum is determined by the state of the disk witness. The cluster has quorum if one node is available and communicating with a specific disk in the cluster storage. Generally, this mode is not recommended, and it should not be selected because it creates a single point of failure for the cluster.
* Node majority with witness (disk or file share)
Nodes have votes. In addition, a quorum witness has a vote. The cluster quorum is the majority of voting nodes in the active cluster membership plus a witness vote. A quorum witness can be a designated disk witness or a designated file share witness.
Note:
* Quorum in Windows 2008 R2 referred to a consensus , that is, a majority of votes is required in order to reach quorum and maintain stability of the cluster. A new option created in Windows Server 2012 R2 which was also back ported to Windows Server 2008 R2 SP1 was the ability to stop a node being able to participate in the voting process.
* Dynamic quorum is the ability of the cluster to recalculate quorum on the fly and still maintain a working cluster. This is a huge improvement as we are now able to continue to run a cluster even if the number of nodes remaining in the cluster is less than 50%. This was not possible before but the dynamic quorum concept now allows us to do this. In fact we can reduce the cluster down to the last node (known as last man standing) and still maintain quorum. Reference: Configure and Manage the Quorum in a Windows Server 2012 R2 Failover Cluster
QUESTION 190
Your network contains an Active Directory domain named contoso.com. The domain contains four servers named Server1, Server2, Server3, and Server4 that run Windows Server 2012 R2. All servers have the Hyper-V server role and the Failover Clustering feature installed.
The servers are configured as shown in the following table.
Which three actions should you perform? (Each correct answer presents part of the solution. Choose three.)
A. From Hyper-V Manager on a node in Cluster2, create three virtual machines.
B. From Hyper-V Manager on a node in Cluster2, modify the Hyper-V settings.
C. From Failover Cluster Manager on Cluster1, configure each virtual machine for replication.
D. From Cluster1, add and configure the Hyper-V Replica Broker role.
E. From Cluster2, add and configure the Hyper-V Replica Broker role.
Answer: ACE
Explanation:
A: Need to have same number of replicated VMs in the replicated site.
C: Once the hosting server is configured for Replica, you can enable replication for each virtual machine that you want to be replicated.
E: The Hyper-V Replica Broker is placed in the replicated cluster Note:
* Each node of the failover cluster that is involved in Replica must have the Hyper-V server role installed.
* Windows Server 2012 R2 Hyper-V Replica is a built-in mechanism for replicating Virtual Machines (VMs). It can replicate selected VMs in real-time or asynchronously from a primary site to a designated replica site across LAN/WAN. Here a replica site hosts a replicated VM while an associated primary site is where the source VM runs. And either a replica site or a primary site can be a Windows Server 2012 R2 Hyper-V host or a Windows Server 2012 R2 Failover Cluster.
Passing Microsoft 70-412 Exam successfully in a short time! Just using Braindump2go’s Latest Microsoft 70-411 Dump: http://www.braindump2go.com/70-412.html