Free Download Oracle 1Z0-593 Practice Tests with PDF & VCE
Oracle Real Application Clusters 11g Essentials: 1Z0-593 Exam
1Z0-593 Questions & Answers
Exam Code: 1Z0-593
Exam Name: Oracle Real Application Clusters 11g Essentials
Q & A: 80 Q&As
QUESTION 1
List the syntax supported by the Cluster Verification Utility (CVU). (select all that apply)
A. comp – To show valid components with description
B. stage – To list pre and post checks of stages
C. asm – To list valid disks available
D. dbstat – To list number of instances available online
Answer: AB
Explanation:
A: To verify the minimal system requirements on the nodes prior to installing Oracle Clusterware
or Oracle RAC, use the sys component verification command as follows:
cluvfy comp sys [ -n node_list ] -p { crs | database } } [-r { 10gR1 |
10gR2 | 11gR1} ] [ -osdba osdba_group ] [ -orainv orainventory_group ]
[-verbose]
B: To verify whether your system meets all of the criteria for an Oracle Clusterware installation,
use the -pre crsinst command for the Oracle Clusterware installation stage as follows:
cluvfy stage -pre crsinst -n node_list
[ -c ocr_location ] [-r { 10gR1 | 10gR2 | 11gR1} ][ -q voting_disk ]
[ -osdba osdba_group ]
[ -orainv orainventory_group ] [-verbose]
QUESTION 2
Which is not a node app?
A. ASM
B. ONS
C. GSD
D. VIP
Answer: A
Explanation:
Note:
* srvctl modify nodeapps Options
OptionDescription
-n node_name
Node name.
-o clusterware_home
Oracle Clusterware home for node applications such as VIP, ONS, and GSD.
-A new_vip_address
The node level VIP address (name|ip/netmask[/if1[|if2|…]]).
* srvctl config nodeapps Option
OptionDescription
-n node_name
Node name.
-a
Displays the VIP address configuration.
-g
Displays the GSD configuration.
-s
Displays the ONS configuration.
-l
Displays the listener configuration.
Reference: Oracle Real Application Clusters Administration and Deployment Guide, A Server
Control Utility Reference
QUESTION 3
You are creating a RAC database with DBCA. Which of these is NOT a main area of initialization
parameters you can configure as part of the process?
A. Memory
B. page size
C. Character set
D. Connection mode
Answer: B
Explanation:
The Initialization Parameters page appears. By default, the Initialization Parameters page shows
only the basic parameters, and only enables you to change the parameter file definition if you are
using raw storage. Each tab on the Initialization Parameters page provides different sets of
information that you can add or modify as follows:
a. Memory Tab.
Reference: Oracle Database Oracle Clusterware and Oracle Real Application Clusters Installation
Guide 10g Release 2 (10.2) for Microsoft Window, Creating an Oracle Real Application Clusters
Database with DBCA
QUESTION 4
Which tool can be used to specify network interfaces and to retrieve component configuration
information?
A. CVU
B. SRVCTL
C. CRSCTL
D. OIFCFG
Answer: D
Explanation:
The Oracle Interface Configuration (OIFCFG) command-line interface helps you to define and
administer network interfaces. You can issue OIFCFG commands in single-instance and Oracle
Clusterware environments to:
Allocate and deallocate network interfaces to components Direct components to use specific
network interfaces Retrieve component configuration information
Reference: Oracle Interface Configuration (OIFCFG) Command Reference
QUESTION 5
You want to set full debugging for the communications and resource management components
for the CRS module on nodes host01 and host03. How can you accomplish this?
A. crsctl set log CRS "CRSCTL: 5, CRSCOMM: 5" -nodelist host01, host03
B. crsctl lsmodules crs set log CRSCTL: 5, CRSCOMM: 5 -nodelist host01, host03
C. srvctl set log -m CRSCTL5, CRSCOMM 5 -n host01, host03
D. ocrconfig set log CRS "CRSCTL, CRSCOMM: 5" -nodelist host 01, host03
Answer: A
Explanation:
To set log levels for the CRSRTI and CRSCOMM components of the CRS module:
$ crsctl set log crs "CRSRTI=1,CRSCOMM=2"
Reference: Oracle Clusterware Administration and Deployment Guide, CRSCTL Utility Reference
QUESTION 6
What would be the total space required for Clusterware files when stopping them in the ASM
Diskgroup configured with NORMAL redundancy? (Assume each OCR and voting Disk files uses
300 MB.)
A. 1.5 GB
B. 2.4 GB
C. 600 MB
D. 900 MB
Answer: A
Explanation:
When you use normal redundancy, Oracle Clusterware automatically maintains two copies of the
OCR file and three copies of the voting disk file.
Reference: About Oracle Clusterware
QUESTION 7
Which OCRCONFIG command backs up the OCR to the -backuploc location?
A. -overwrite
B. -backuploc pathname
C. -manualbackup
D. -export
Answer: C
Explanation:
ocrconfig -manualbackup
Use the ocrconfig -manualbackup command to back up OCR on demand in the location you
specify with the -backuploc option.
Incorrect:
Not C: This command just defines the backuploc location.
ocrconfig -backuploc
Use the ocrconfig -backuploc command to specify an OCR backup directory location.
Syntax
ocrconfig [-local] -backuploc file_name
Example
To specify an OCR backup location in a directory:
# ocrconfig -backuploc $Grid_home/cdata/cluster3
Reference: Oracle Cluster Registry Utility Reference
…go to http://www.lead2pass.com/1z0-593.html to download the full version Q&As.