Free Download Citrix 1Y0-A05 Exam Questions

Implementing Citrix XenApp 5.0 for Windows Server 2008: 1Y0-A05 Exam

  • 1Y0-A05 Questions & Answers
  • Exam Code: 1Y0-A05
  • Exam Name: Implementing Citrix XenApp 5.0 for Windows Server 2008
  • Q & A: 217 Q&As

1: Scenario: An administrator determined that an application pilot environment should be installed. Two servers have been allocated for this purpose. How should the pilot environment be established and why?
A.The servers should be placed in a distinct farm so that testing does NOT impact production.
B.The servers should be placed in a distinct zone so that testing does NOT impact production.
C.The servers should be configured based on virtual servers so that scalability data can be derived for physical servers.
D.The servers should be configured to access a distinct license server to prevent impacting license server communications.
Correct Answers: A

2: Scenario: An administrator installed the XenApp Advanced Configuration tool to administer a Citrix XenApp server remotely. The server is accessed through a WAN link and it is behind a firewall. Which TCP port should be opened on the firewall to allow the administrator to connect remotely by means of the XenApp Advanced Configuration tool?
A.1494
B.2512
C.2513
D.2598
Correct Answers: C

3: Scenario: An administrator is in the process of implementing zone preference and failover for a Citrix XenApp farm. The administrator already configured a Citrix policy named "ZPF Policy." Which three filters can the administrator use to apply this policy and implement zone preference and failover? (Choose three.)
A.Users
B.Servers
C.Client Name
D.Access Control
E.Client IP Address
Correct Answers: A C E

4: Session reliability is based on which Citrix service?
A.IMA
B.XML
C.XTE
D.Services Manager
Correct Answers: C

5: An administrator is installing Web Interface in order to support Windows laptop users that require offline applications.Which type of site should the administrator create to support these users?
A.XenApp Web
B.XenApp Services
C.Web Interface for SharePoint
D.XenApp Plugin for Streamed Apps
Correct Answers: B

try_now

Free Download Citrix 1Y0-A18 Exam Questions

Basic Administration for Citrix XenApp 6: 1Y0-A18 Exam

  • 1Y0-A18 Questions & Answers
  • Exam Code: 1Y0-A18
  • Exam Name: Basic Administration for Citrix XenApp 6
  • Q & A: 119 Q&As

1.A zone data collector ___________ . (Choose the correct option to complete the sentence.)
A. handles ICA traffic for the zone
B. writes information to the data store
C. is responsible for maintaining server load evaluator information
D. makes sure all XML traffic is routed between the servers in the zone
Answer: C

2.Scenario: A company's XenApp farm is spread across four geographically separated datacenters. Each datacenter is its own zone in the farm. Datacenter A contains 50 servers. Datacenter B contains 100 servers. Datacenter C contains 20 servers, and Datacenter D contains 10 servers, one of which is the license server.
Which datacenter would be the appropriate location for the farm's data store.?
A. Datacenter A
B. Datacenter B
C. Datacenter C
D. Datacenter D
Answer: B

3.Which port is used by the Citrix License Administration Console?
A. 2598
B. 7279
C. 8082
D. 27000
Answer: C

4.Scenario: A user successfully launched a published application delivered from a XenApp server running within the user's LAN. Session Reliability has been disabled.
Which port is used for communication between the Citrix online plug-in and the XenApp server?
A. 80
B. 1494
C. 2598
D. 3389
Answer: B

5.Scenario: A user successfully launched a published application through an Access Gateway. The application is delivered from a XenApp server running in the datacenter and Session Reliability has been enabled.
Which port is used for communication between the Access Gateway and the XenApp server?
A. 80
B. 443
C. 1494
D. 2598
Answer: D

6.Which statement best describes the purpose of the data collector?
A. It verifies a user's permissions for the requested application.
B. It is used by the Delivery Services Console to run the farm discovery.
C. It authenticates the user and populates the Web Interface with their icons.
D. It maintains and communicates farm information to data collectors in other zones
Answer: D

7.Scenario: A XenApp farm is located in a datacenter in New York. A request has been made to add a XenApp server in London. The WAN network connection is stable enough to allow the new server to exist in the New York farm.
What should be done by the administrator to ensure that the least amount of Citrix IMA traffic traverses the WAN?
A. The administrator needs to create a new zone and add the new server to that zone, making it the zone data collector.
B. The administrator does not need to create a new zone because Citrix IMA traffic will only originate from the data collector.
C. The administrator does not need to create a new zone if "Not Preferred" is specified as the election preference for the new server.
D. The administrator does not need to create a zone for the new server, but rather create a new farm and link Citrix IMA traffic in the Delivery Center.
Answer: A

8.Which three options can an administrator use to add members to the Remote Desktop Users group during a XenApp installation? (Choose three.)
A. Power Users
B. Domain Users
C. Administrators
D. Anonymous Users
E. Authenticated Users
F. List of users from the Users Group
Answer: DEF

9.Which method can be used when changing the farm membership of a server?
A. Run the QFARM command.
B. Run the CHFARM command.
C. Use XenApp Server Role Manager.
D. Use the Delivery Services Console.
Answer: C

10.Which statement correctly describes behavior of the XenApp Server Role Manager?
A. Remote Desktop Services will be automatically installed. Within the XenApp Server role the online plug-in is automatically installed.
B. Remote Desktop Services will need to be installed separately. Within the XenApp Server role the online plug-in is automatically installed.
C. Remote Desktop Services will be automatically installed. Within the XenApp Server role both the online and offline plug-in are automatically installed.
D. Remote Desktop Services will need to be installed separately. Within the XenApp Server role both the online and offline plug-in are automatically installed.
Answer: C

try_now

Free Download Citrix 1Y0-A20 Exam Questions

Citrix XenApp 6.5 Administration : 1Y0-A20 Exam

  • 1Y0-A20 Questions & Answers
  • Exam Code: 1Y0-A20
  • Exam Name: Citrix XenApp 6.5 Administration
  • Q & A: 116 Q&As

QUESTION 1
Scenario: A XenApp administrator must recommend a database option for the new XenApp 6.5 data store. The new farm will have more than 100 XenApp servers and 500 published resources, support more than 5,000 concurrent users and have two zones separated by a WAN connection.
Which two database options should be administrator recommend? (Choose two.)
A.    IBM DB2 9.7
B.    Oracle Enterprise 1.1
C.    Microsoft SQL Server 2008
D.    Microsoft SQL Server Express 2008
Answer: BC

QUESTION 2
Scenario: The administrator of a small XenApp server farm has configured end-to-end encryption between the XenApp servers and user devices by setting up Access Gateway VPX. Session Reliability is enabled in the farm with default settings.
Over which port will published applications be delivered?
A.    80
B.    443
C.    1494
D.    2598
Answer: B

QUESTION 3
Scenario: The administrator of a XenApp Enterprise Edition server farm is configuration Single Sign-on for the users of the farm. The Citrix license server was installed with the default vendor daemon and console Web port numbers, but NOT the default license server port number.
Of the port numbers that are in use in the XenApp server farm, which one should the administrator specify for the license server during Single Sign-on configuration?
A.    443
B.    7279
C.    8082
D.    27009
Answer: D

QUESTION 4
In building out a new XenApp environment, an administrator places the Secure Gateway and Web Interface in the DMZ. What must the administrator do to secure the traffic to the XML Broker?
A.    Change the XML traffic port to a non-standard assignment.
B.    Use the SSL Relay tool to encrypt traffic to the XML Broker in the farm.
C.    Place the XML Broker in the DMZ and encrypt the traffic between them.
D.    Use encrypted ICA to communicate between the XML Broker and the Web Interface.
Answer: B

QUESTION 5
An administrator needs to install a XenApp 6.5 server to act as an additional dedicated data collector. After installing XenApp on the new server, the next step is to configure it by enabling the __________.
A.    Session-host mode only
B.    Controller and Session-host modes
C.    data collector and XML Broker host mode
D.    data collector and XTE Service host mode
Answer: C

try_now

Free Download Citrix 1Y0-A14 Exam Questions

Implementing Citrix XenDesktop 3: 1Y0-A14 Exam

  • 1Y0-A14 Questions & Answers
  • Exam Code: 1Y0-A14
  • Exam Name: Implementing Citrix XenDesktop 3
  • Q & A: 78 Q&As

1: Scenario: A user is attempting to access a virtual desktop. Web Interface sent an .ICA file, but an ICA connection failed to establish.
Which component of the XenDesktop architecture has failed to communicate with the virtual desktop?
A.Desktop Receiver
B.Domain Controller
C.Virtual Desktop Agent
D.Desktop Delivery Controller
Correct Answers: A

2: Scenario: A user is attempting to access a virtual desktop provided by Provisioning Services. The Desktop Delivery Controller has requested that the virtual machine infrastructure boot the virtual desktop.
Which step in the desktop delivery process occurs next?
A.The disk image will be streamed to the virtual desktop
B.The Desktop Delivery Controller will query the license server
C.The Profile Management feature will apply user profile settings to the virtual desktop
D.The computer account of the virtual desktop will be created in Microsoft Active Directory
Correct Answers: A

3: Which two components are needed to access a virtual desktop from a remote Macintosh device? (Choose two.)
A.SSH
B.PNAgent
C.Web browser
D.Virtual Desktop Agent
E.Citrix Desktop Receiver
Correct Answers: C E

4: An administrator needs to configure pooled desktops for a large number of users and would like to automate this process.
Which two components can the administrator use to complete this task? (Choose two.)
A.XenCenter
B.Desktop Receiver
C.Virtual Desktop Agent
D.Provisioning Services
E.XenDesktop Setup Wizard
Correct Answers: D E

5: An administrator needs to create virtual desktops for a large XenDesktop implementation.
Which component can the administrator use to automate this process?
A.Virtual Desktop Agent
B.XenDesktop Setup Wizard
C.Presentation Server Console
D.Active Directory Configuration Wizard
Correct Answers: B

6: Which issue can the Profile Management feature address in a XenDesktop implementation?
A.Ability of users to switch between multiple profiles
B.Profile bloat because extraneous files are copied to the profile
C.Printing failure because printer properties are not updated at each logon
D.Inability to connect to a virtual desktop because it is listed as Not Registered
Correct Answers: B

7: Which two .MSI files does an administrator need to install on user endpoint devices so that they work as domain-joined repurposed PCs? (Choose two.)
A.UserProfileManager.MSI
B.VirtualDesktopAgent.MSI
C.DesktopReceiverFull.MSI
D.DesktopApplianceLock.MSI
Correct Answers: C D

8: Which task must an administrator perform to prepare a Linux-based desktop appliance for connection with a virtual desktop?
A.Install Virtual Desktop Agent
B.Set up local Linux user accounts
C.Install the Profile Management feature
D.Configure a URL to connect to Web Interface
Correct Answers: D

9: Which component of the XenDesktop architecture uses Microsoft Active Directory to find the controllers that constitute a farm?
A.Data Store
B.Desktop Receiver
C.Virtual Desktop Agent
D.Desktop Delivery Controller
Correct Answers: C

10: What is the role of a DHCP server in a XenDesktop environment?
A.Assigns an IP address to a virtual machine upon startup
B.Sends the boot server host name to the vDisks in the farm
C.Sends the boot file name to the Desktop Receiver upon startup
D.Assigns MAC addresses to virtual desktops when they are created
Correct Answers: A

try_now

Free Download 10g OCM Oracle Database 10g Administrator Certified Master Exam Dumps

Duration: 2 Days

First Day:

Section 0:

Create the Database

45 Minutes

Section 1:

Database and Network Configuration

120 Minutes

Section 2:

Grid Control Installation and Configuration

120 Minutes

Section 3:

Database Backup and Recovery

60 Minutes

Section 4:

Data Warehouse Management

90 Minutes

Second Day:

Section 5:

Database Management

120 Minutes

Section 6:

Database Performance Management

120 Minutes

Section 7:

Oracle RAC Database Deployment

105 Minutes

Section 8:

Data Guard Deployment

60 Minutes

NOTE: The exam starts promptly at 9:00 AM. Plan on finishing no sooner than 6:00 PM. Late arrivals are not guaranteed entry but may be accommodated at the sole discretion of the proctor.

Plan your travel schedule accordingly to ensure enough time to work through each scenario. Participants are not permitted to enter or leave the classroom once a skillset has started; they must wait until the next skillset.

Scoring

Participants are scored on their ability to complete assigned tasks and to recover from various database failure scenarios. Data from each participant’s environment is collected at the end of each scenario and used to determine the final score. In some scenarios, participants may receive partial credit, however the inability to recover from a failure scenario results in zero credit for an entire scenario. The proctor is not responsible for scoring the exam and will not have scoring information during the event.

Participants will be notified of their final score 4 – 5 weeks following the exam. Upon attaining a successful score, a participant is awarded the Oracle Certified Master credential. Participants who do not earn a passing score are required to retake the entire exam at a later date.

Section 0: Create the Database *45 Minutes

1. Database Setup and Undo Management

1.1 Run the minimum required scripts to complete the basic configuration of the PROD database.

1.2 Set up automatic undo management in the PROD database to support the following requirements:

1.2.1 Avoid ORA-01555 Snapshot too old errors for queries running up to 90 minutes on average.

1.2.2 The number or concurrent OLTP users will be approximately 120 during normal business hours.

1.2.3 The number or concurrent batch processes that will run in the evenings and weekends will approximately 12 to 15

****

1. vi .bash_profile

export ORACLE_SID=prod

export EDITOR=vi

2. vi /etc/oratab

prod:/u01/app/oracle/OracleHomes/db10g:N

3. create initPROD.ora

cat init.ora |grep –v ^# |grep –v ^$ > initprod.ora

——————-

db_name=prod

db_block_size=8192

compatible=’10.2.0.1.0’

sga_max_size=300m

sga_target=300m

log_buffer=524288

processes=250

control_files=(/u01/app/oracle/oradata/PROD/Disk1/ctrl1.ctl,

/u01/app/oracle/oradata/PROD/Disk2/ctrl2.ctl,/u01/app/oracle/oradata/PROD/Disk3/ctrl3.ctl)

audit_file_dest=’ /u01/app/oracle/admin/PROD/adump’

background_dump_dest=’ /u01/app/oracle/admin/PROD/bdump’

core_dump_dest=’ /u01/app/oracle/admin/PROD/cdump’

user_dump_dest=’ /u01/app/oracle/admin/PROD/udump’

undo_management=AUTO

See more from Full Version please visit http://www.lead2pass.com/10g-ocm.html