[Dec.-2016-New]Microsoft 70-743 Exam VCE Dumps Free Download in Braindump2go[Q31-Q40]

2016 Dec. New Microsoft 70-743: Upgrading Your Skills to MCSA: Windows Server 2016 Exam Questions Released Today!
Free Instant Download 70-743 Exam Dumps (PDF & VCE) 70Q&As from Braindump2go.com Today!

100% Real Exam Questions! 100% Exam Pass Guaranteed!

1.|2016/12 New 70-743 Exam Dumps (PDF & VCE) 70Q&As DownloaD:
http://www.braindump2go.com/70-743.html

2.|2016/12 New 70-743 Exam Questions & Answers:
https://1drv.ms/f/s!AvI7wzKf6QBjgRnc2tStvlhD7fYO

QUESTION 31
Drag and Drop Question
You have a server named Server1 that runs Windows Server 2016.
You plan to deploy Internet Information Services (US) in a Windows container.
You need to prepare Server1 for the planned deployment.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order
 
Answer:
 

QUESTION 32
You have a Hyper-V host named Served That runs Windows Server 2016.
Server1 has a virtual machine named VM1, VM1 is configured to run the Docker daemon.
On VM1 you have a container network that uses transparent mode.
You need to ensure that containers that run on VM1 can obtain IP addresses from DHCP.
What should you do?

A.    On VM1, run docker network connect
B.    On Server1runGet-VMNetworkAdapter-VMName VM1| Set-VMNetworkAdapter-MacAddressSpoofing On.
C.    On Server1, run docker network connect
D.    On VM1, run Get-VMNetworkAdapter-VMName VM1| Set-VMNetworkAdapter-MacAddressSpoofing On.

Answer: D

QUESTION 33
You have a server named Served that runs Windows Server 2016.
Server1 will be used as a VPN server.
You need to configure Server1 to support VPN Reconnect.
Which VPN protocol should you use?

A.    PPTP
B.    L2TP
C.    SSTP
D.    lKEv2

Answer: D

QUESTION 34
You have a server named Server1 that runs Windows Server 2016.
You install the Docker daemon on Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500.
What should you do?

A.    Run the New-NetFirewallRulecmdlet
B.    Run the Set-ServiceWindows PowerShell cmdlet.
C.    Edit the daemon.json file.
D.    Edit the configuration json file

Answer: C

QUESTION 35
You have an Active Directory domain named Contoso com.
The domain contains servers named Server1 and Server2 that run Windows Server 2016.
You install the Remote Access server role on Server1.
You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server.
What should you do?

A.    From Routing and Remote Access, configure the authentication provider.
B.    From the Connection Manager Administration Kit, create a Connection Manager profile
C.    From Server Manager, create an Access Policy.
D.    From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.

Answer: A

QUESTION 36
Hotspot Question
You have a server that runs Windows Server 2016.
You run the commands shown in the following output PS G:\> Get-DedupVolume | f1
 
For each of the following statements, select Yes if the statement is true. Otherwise, select No.
 
Answer:
 

QUESTION 37
Drag and Drop Question
You have a server that runs Windows Server 2016.
You install three additional physical disks named Disk1, Disk2 and Disk3.
You plan to use these physical disks to store data.
You need to create a volume to store data.
The solution must prevent data loss in the event of a single disk failure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order
 
Answer:
 

QUESTION 38
You have a server that runs Windows Server 2016.
The server contains a storage pool named Pool1.
Pool1 contains five physical disks named Disk1, Disk2, Disk3, Disk4 and Disk5.
A virtual disk named VirtualDisk1 is stored in pool1.
VirtualDisk1 uses the panty storage layout Disk3 fails.
You need to remove Disk3 from Pool1.
Which two commands should you run? Each correct answer presents part of the solution.

A.    Update-StoragePool -FriendlyName Pool1
B.    Reset-PhysicalDisk -FriendlyName Disk3
C.    Set-PhysicalDisk -FriendlyName Disk 3 -Usage Retired
D.    Set-ResillencySetting -StoragePool Pool1 -PhysicalDiskRedundancyDefault
E.    Remove-PhysicalDisk -FriendlyName Disk3

Answer: C

QUESTION 39
Your network contains an Active Directory domain named contoso com.
The domain contains two servers named Server1 and Server2 that have the same hardware configuration.
You need to asynchronously replicate volume F: from Server1 to Server2.
What should you do?

A.    Run New-SRPartnership and specify the 璕ephcation Mode parameter.
B.    install the Failover Clustering feature and create a new cluster resource group.
C.    Install the Failover Clustering feature and use Cluster Shared Volumes (CSV).
D.    Run Set-DfsrService Configuration and specify the 璕PC Port parameter

Answer: A

QUESTION 40
Hotspot Question
You have a server named Server1 that runs Windows Server 2016.
Server1 has the Windows Application proxy role service installed.
You plan to deploy Remote Desktop Gateway (RD Gateway) services.
Clients will connect to the RD Gateway services by using various types of devices including Windows, iOS and Android devices.
You need to publish the RD Gateway services through the Web Application Proxy.
Which command should you run? To answer, select the appropriate options in the answer area.
 
Answer:


!!!RECOMMEND!!!

1.Braindump2go|2016/12 New 70-743 Exam Dumps (PDF & VCE) 70Q&As DownloaD:
http://www.braindump2go.com/70-743.html

2.Braindump2go|2016/12 New 70-743 Exam Questions & Answers:
https://youtu.be/P5Bqu9Thi6o