642-145 IIUC2 Real Exam Questions

The 642-145 IIUC2 Implementing Cisco IOS Unified Communications Part 2 exam is the exam associated with the CCNA Voice Associate certification. This exam tests a candidate’s knowledge of installing Cisco Unified Communications Manager Express and Cisco Unity Express, with support for both SCCP and SIP endpoints, Unified Call Connector, Call Connector Mobility and PSTN Calling. In addition, performance monitoring and maintenance tasks are covered as well as configuring Unified Messaging Gateway, and troubleshooting. Candidates can prepare for this exam by taking the Implementing Cisco IOS Unified Communications Part 2 course.

1: Your IP telephony manager wants you to configure an FXS port on a voiceenabled router with these requirements: 1) It supports groundstart signaling. 2) Calling name is James Smith. 3) Calling number is 4085551212. 4) Ring frequency is 25hz. 5) Ring cadence is for Germany. Which configuration will meet these requirements?
A.voiceport 1/0/0 signal groundstart cptone DE ring frequency 25 stationid name James Smith stationid number 4085551212
B.voiceport 1/0/0 description extension 5551212, name "James Smith" signal groundstart ring cadence DE ring frequency 25
C.voiceport 1/0/0 description extension 5551212, name "James Smith" ring cadence Germany ring frequency 25 stationid name James Smith stationid number 5551212
D.voiceport 1/0/0 signal groundstart cadence Germany frequency 25 stationid name James Smith stationid number 4085551212
Answer: A

2: What is the best practice of configuring an intercom on a shared line?
A.This feature allows all endpoints to participate in intercom messages.
B.This feature allows one endpoint to contact multiple endpoints simultaneously.
C.This feature is not supported and should not be used.
D.This feature can be used only when the intercom ephonedn is configured as a dual line.
E.This feature can be supported only in a unidirectional manner.
Answer: C

3: Which mode allows you to configure the BACD service provided in Cisco Unified Communications Manager Express?
A.Tcl
B.telephony
C.application
D.IPtelephony
E.telephonyservice
Answer: C

4: Acme Co. is using a Cisco Unified Messaging Gateway to network two of their Cisco Unified Communications Manager Express/Cisco UnityExpress sites to each other. Site11is running CiscoUnity Express 2.3.4 and Cisco Unified Communications Manager Express 3.2 and site 12 is running Cisco Unified Communications Manager Express 4.2(0) and Cisco Unity Express 3.1. One of the sites autoregisters correctly with the Cisco Unified Messaging Gateway, but the other site does not. Which site is not autoregistering and what is the reason it is not registering? (Choose two.)
A.Site 11 is not autoregistering.
B.Cisco Unified Communications Manager Express 4.2 does not support Cisco Unified Messaging Gateway autoregistration.
C.Site 12 is not autoregistering.
D.Cisco Unity Express 2.3.4 does not support Cisco Unified Messaging Gateway autoregistration.
E.Cisco Unity Express 3.1 does not support Cisco Unified Messaging Gateway autoregistration.
F.Cisco Unified Communications Manager Express 3.2 does not support Cisco Unified Messaging Gateway autoregistration.
Answer: A D

5: Jerry’s Fish Farm is installing in a Cisco Unified Communications Manager Express system at their new Sales facility. The office has 4 sales people that handle all incoming sales calls. The manager does not want to have to have a receptionist to answer and route calls, so he wants all of the sales people phones to have the main sales phone number. He also wants them to all ring at the same time, allowing the first availabl e sales person to answer the call. What type of phone system model should they deploy?
A.Octel
B.Key
C.Centrex
D.PBX
E.PSTN
Answer: B

6: An IT manager has been trying to configure Cisco Unified CallManager Express without success. The IT manager has decided that there might be more success with the Automated Setup Utility. To start this process, what command should be executed first?
A.autosetup
B.auto assign
C.no telephonyservice
D.auto telephonyservice
E.telephonyservice auto
F.telephonyservice setup
Answer: C

7: Which command is used to configure the MAC address of an IP phone for your Cisco Unified Communications Express system?
A.RtrHannahCP(configephone)# macaddress hhhhhhhhhhhh
B.RtrHannahCP(configtelephony)# macaddress hhhhhhhhhhhh
C.RtrHannahCP(configephonedn)# macaddress hhhhhhhhhhhh
D.RtrHannahCP(configephone)# macaddress hhhh.hhhh.hhhh
E.RtrHannahCP(configtelephony)# macaddress hhhh.hhhh.hhhh
F.RtrHannahCP(configephonedn)# macaddress hhhh.hhhh.hhhh
Answer: D

8: Your organization wants to provide systemwide call blocking to long distance and international numbers outside of normal business hours, even though there may be employees in the office. Which method allows this to be accomplished?
A.Assign a class of restriction to each ephonedn and each dial peer.
B.Configure hours outside normal business hours and apply to each ephonedn.
C.Configure afterhours times and dialednumber ranges to block and apply though the after hours command.
D.Configure afterhours times and dialednumber ranges to block.
Answer: C

Download  |  Password: certificatexam.com